Smc-networks SMC2662W-AR Manual do Utilizador

EZ Connect™Wireless USB AdapterUser GuideSMC2662W-ARV 1.0

EnglishEnglishCreate with PassphraseSecurity keys for WEP encryption are generatedfrom your Passphrase string, so you must use thesame passphrase on a

EnglishEnglishNETWORK CONFIGURATION AND PLANNINGSMC’s EZ Connect Wireless Solution supports a stand-alone wirelessnetwork configuration, as well as an

EnglishEnglishSetting the Communication DomainStationary Wireless PCsThe Basic Service Set (BSS) is the communication domain for eachSMC2652W access p

NETWORK CONNECTION PROBLEMSIf the LED’s on the USB adapter are not lit, or if you can’t accessany network resources from the computer. Check the follo

COMPLIANCESFCC Class B CertificationThis device complies with Part 15 of the FCC Rules. Operation issubject to the following conditions:1. This device

SPECIFICATIONSFunctional CriteriaData Rate 1, 2, 5.5, 11 MbpsTransmission Mode Half duplexNetwork Connection IEEE 802.11b wirelessOperating Range

CopyrightInformation furnished by SMC Networks, Inc. (SMC) is believed tobe accurate and reliable. However, no responsibility is assumed bySMC for its

EZ Connect Wireless USB adapter ManualThe 11 Mbps wireless USB adapter is an easy to use, cost-effective,high-speed and secure wireless networking dev

DRIVER INSTALLATIONSelect the driver you need for your system and refer to this guidefor the installation and configuration procedure. Any new orupdat

EnglishEnglish4. Set the "Channel" to the same radio channel as that usedby the other wireless clients in your group. However, if youare co

8. Set the "RTS Threshold" to the same as that used by otherdevices in your network. (The default is 2347 which means"Disabled")9

12. Select the "Configuration" tab and click "Add" to install thenetwork protocols you want to use, such as IPX/SPX,NetBEUI or TCP

EnglishEnglish4. Finish the driver installation.5. If you want to add more protocols after installation, go tocontrol panel and double click on "

EnglishEnglishQuick-Launch IconAfter the utility program is running, it will have a "Quick Launch"icon in the lower right hand corner of the

EnglishEnglishPS Mode Enable the Power Saving Mode for reducing powerloading. (Default: Disabled)Note : The "Channel" can only be set when