Smc-networks SMC2555W-AG Manual do Utilizador descarregar pdf (Página 137)

General Commands

6-13

ping

This command sends ICMP echo request packets to another

node on the network.

Syntax

ping <host_name | ip_address>

• host_name - Alias of the host.

• ip_address - IP address of the host.

Default Setting

None

Command Mode

Exec

Command Usage

• Use the ping command to see if another site on the network

can be reached.

• The following are some results of the ping command:

– Normal response - The normal response occurs in one to

ten seconds, depending on network traffic.

– Destination does not respond - If the host does not

respond, a “timeout” appears in ten seconds.

– Destination unreachable - The gateway for this destination

indicates that the destination is unreachable.

– Network or host unreachable - The gateway found no

corresponding entry in the route table.

• Press <Esc> to stop pinging.

Example

SMC-AP#ping 10.1.0.19

192.168.1.19 is alive

SMC-AP#

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 255 256

Sem comentários

Smc-networks SMC2555W-AG Manual do Utilizador Página 137