The following table describes the LEDs of the device.
LED Status Color Description
On The device is powered on and the initialization is normal.
Off
Green
The device is powered off.
On The device is initializing.
Power
Blinks
Red
The firmware is upgrading.
On The Internet connection is normal.
Blinks Data is being transmitted on the Internet.
Link
Off
Blue
The Internet connection is failed.
On The WLAN connection is established.
Blinks Data is being transmitted through the WLAN interface.
WLAN
Off
Green
The WLAN connection is failed.
On The LAN connection is normal and active.
Blinks Data is being transmitted through the Ethernet interface.
LAN4/LAN3/LAN2
/LAN1
Off
Green
The LAN connection is failed.
Rear panel
The following table describes the interfaces of the device.
Interface Function
Power switch, power on or power off the device.
Reset
Resets to the factory defaults. To restore factory defaults, keep the device powered on and
push a paper clip into the hole. Press down the button over 5 seconds, then release.
Power Power interface, for connecting to the power adapter of 12 V DC, 1 A.
LAN1/LAN2/LAN3
/LAN4
RJ-45 interface, for connecting to the Ethernet interface of the PC or the Ethenet devices with
the cable.
Line
RJ-11 interface, for connecting to the ADSL interface or a splitter through the telephone
cable.
2
Comentários a estes Manuais