Smc-networks 16 10BASE-T Manual do Utilizador Página 286

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 285
Command Line Interface
4-110
4
switchport broadcast packet-rate
This command configures broadcast storm control. Use the no form to disable
broadcast storm control.
Syntax
switchport broadcast octet-rate rate
no switchport broadcast
rate - Threshold level as a rate; i.e., octets per second.
(Range: 64-95232000)
Default Setting
Enabled for all ports
Packet-rate limit: 32000 octets per second
Command Mode
Interface Configuration (Ethernet)
Command Usage
When broadcast traffic exceeds the specified threshold, octets above that
threshold are dropped.
This command can enable or disable broadcast storm control for the selected
interface. However, the specified threshold value applies to all ports on the
switch.
Example
The following shows how to configure broadcast storm control at 600 octets per
second:
clear counters
This command clears statistics on an interface.
Syntax
clear counters interface
interface
ethernet unit/port
- unit - This is device 1.
- port - Port number.
port-channel channel-id (Range: 1-4)
Default Setting
None
Console(config)#interface ethernet 1/5
Console(config-if)#switchport broadcast octet-rate 600
Console(config-if)#
Vista de página 285
1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 383 384

Comentários a estes Manuais

Sem comentários