Smc-networks EtherNet/IP EX500-GEN1 Manual do Utilizador descarregar pdf (Página 8)

12 13

Wiring ( continued )

Communication wiring

Aligning the key groove with the communication connector

( 4-pin, socket ) of GW unit, plug the Ethernet

communication cable ( plug ).

Tighten the lock nut on cable side by turning it

clockwise by hand.

Confirm that the connector portion does not move.

Pin layout and connection diagram of cable with Ethernet communication connector

Cable connection

Connect the cable with Ethernet communication connector to the communication

connector of GW unit.

3443

Connect the communication cable with socket-type M12 connector to the

communication connector of GW unit.

Power supply wiring

Connect the power supply connector cable to the power supply connector of GW unit.

There are two types of cables different in connector shape ---- straight type and angle

type. With this cable, the power is supplied to the output devices such as solenoid valve,

and the input devices such as sensor, and for controlling GW/SI. Therefore, there is no

need to supply the power to other units individually.

When selecting the power supply, refer to "Handling precautions" ( page 3 ) in this manual.

Cable connection

Aligning the key groove with the power supply

connector ( plug ) of GW unit, plug the power supply

cable ( socket ).

Tighten the lock nut on cable side by turning it

clockwise by hand.

Confirm that the connector portion does not move.

Pin layout and connection diagram of power supply connector cable for ( unit : mm )

( Pin layout and connection diagram are common to all cables. )

Socket Connector Pin Layout

Straight connector Type Angle connector Type

EX500-AP -S EX500-AP -A

M12

14.9

30 5

31.3

28.3

30 5

Pin No.

Cable color: Signal name

Brown : 0V ( for solenoid valves/output )

White : 24VDC +10%/-5% ( for solenoid valves/output )

Blue : 0V ( for input and controlling GW/SI )

Black :

24VDC 10% ( power supply for input and controlling GW/SI )

Gray : Ground ( PE )

NOTE

Connect a ground cable of 100 or less to PE terminal.

M12

2+Rx

Shield

RJ45

6.7

47.3 452000

EX9-AC020EN-PSRJ

+Tx

Wiring diagram

Cable core wire external color

Terminal No.

Pin assignment of

plug connector

Pin assignment of

plug connector

White/Orange

Orange

White/Green

Green

Core wire color

Sheath color

Cable specifications

AWG 26

Blue green

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 22 23

Comentários a estes Manuais

Sem comentários

Smc-networks EtherNet/IP EX500-GEN1 Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Smc-networks EtherNet/IP EX500-GEN1