Smc-networks ProSoft 1560 Manual do Utilizador descarregar pdf (Página 40)

Contents

Appendix D — Mounting & Cabling

Cable Requirements

SCANport cables are available in either Male to Male or Male to Female

configurations. Cables of up to 10 meters (33 feet) can be connected

from the SCANport device to the 1560-MBP. If a Port Expander is used,

the cable length from the master to the Port Expander must be

subtraced from the cable length used to connect the device to the

expander (B1 + C = max 10 meters).

Generally when selecting a SCANport cable, the Male-Male

configuration will be used. This is true in all cases when

connecting to Ports 2 through 5. If connecting to the HIM

port (Port 1) the Male-Female cable will be required.

Please verify with the Installation Manual for the A–B device the correct

cable configuration. The following drawing, excerpted from A-B

document 1203-5.2, is an example for a 1305 drive installation.

Port 1

Port 2

Optional

Male-Female

Cable

Optional

Remote I/O

Communication Module

Remote I/O

Communication Module

Port Expander

Male-Female

Cable

Human Interface Module

1305 Drive

1 2 ... 35 36 37 38 39 40 41 42 43 44

Sem comentários

Smc-networks ProSoft 1560 Manual do Utilizador Página 40