Smc-networks SMC7004AWBR Manual do Utilizador

SMC WirelessBarricade™RoutersUser GuideSMC7004AWBRV1.0

6. Select “Static IP Address”and click the “Save” button.7. In the spaces provided, keyin the values provided to you by your ISP. (Note: Enter the IP

6. Select “PPP over Ethernet”and click the “Save” button.7. Key in your Account Name and Password in the appropriate fields. If your ISP has supplied

Installing and Configuring the Print ServerIf you are not connecting your printer to your Barricade, skip this section.1. Insert the installation CD i

Using the CDInsert the CD into your CD-ROM drive.The installation screen willautomatically appear. (If it doesn’t,please click “Start”, and then “Run…

1. Open your web browser (i.e. Internet Explorer or Netscape Navigator).2. In the “Location” field (for Netscape) or “Address” field (for Internet Exp

5. In the “Domain Name”field, key in the domainname given to you by your ISP (i.e.xxx.yyy.home.com).6. Click “Save” and then click “Reboot.” 7. When p

D. If you use DSL, you may need to reconfigure your Barricadefor a PPPoE connection (Point to Point Protocol over Ethernet).To reconfigure, go to the

EnglishEnglish4. Double-click the file“RS405ENG.EXE.” This will start theinstallation of the viewersoftware. Follow the screenprompts to complete th

Hardware Installation2.1 Panel Layout2.1.1. Front PanelLEDs monitor the status of each port.Figure 2-1 Front Panel LEDLED Function Colour Status Descr

3. Set up WAN connection:Connect an Ethernet cable from the WAN port to your cable/xDSL modem or Ethernet backbone. Figure 2-3 illustrates the WAN con

4. Select the “IP Address” tab. Click “Obtain an IP addressautomatically.” 5. Click the “Gateway” tab. If thereare any “Installed Gateways” listed, h

7. Click the “OK” button in the“Network” window. Windowsmay copy some files, then willprompt you to restart yoursystem. Click “Yes” and yourcomputer

ii. In the “Preferences”window, under“Category” double-click“Advanced”, then click“Proxies”. Select“Direct connection to the internet.” Click “OK”13

6. Select “Obtain an IP addressautomatically” and then select“Obtain DNS server addressautomatically.” Then click “OK.”Click “OK” or “Close” to close

EnglishEnglishii. In the “Internet Options”window click the“Connections” tab. Next,click the “LAN Settings…”button.iii. Clear all the checkboxes and

Configuring Your Barricadefor a Cable Modem1. Open your web browser(i.e. Internet Explorer or Netscape Navigator).2. In the “Location” field (for Nets