Smc-networks Wireless Broadband Router Manual do Utilizador

Wireless Broadband Router User Guide The information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no resp

-9- 3. Set up WAN connection: Connect an Ethernet cable from the WAN port to your cable/xDSL modem or Ethernet backbone. Figure 2-3 illustrates the

-10- Chapter 3 Network Settings and Software Installation To use this product correctly, you have to properly configure the network settings of your

-11- Request timed out. there must be something wrong in your installation procedure. You have to check the following items in sequence: 1. Is the Et

-12- Step 2: Click on the INSTALL button. Wait until the following Welcome dialog appears, and click on the Next button. Step 3: Select the destinati

-13- Step 4: When the following window is displayed, click on the Finish button. Step 5: Select the item to restart the computer, then click the OK b

-14- Chapter 4 Configuring Wireless Broadband Router This product provides a Web-based configuration scheme, i.e., configuring by Netscape Communi

-15- There are two appearances of web user interface: for general users and for system administrator. To log in as an administrator, enter the syste

-16- 4.2 Status This option provides the function for observing this product’s working status: A. WAN Port Status. If the WAN port is assigned a d

-17- 4.3 Toolbox This option enables you change the administrator password. Besides, you can get the information about Firmware version and WAN'

-18- 4.4 Primary Setup This option is essential to enable this product to work properly. The setting items and the web appearance depend on the WAN t

-1- Trademarks: SMC is a registered trademark and Barricade is a registered trademark of SMC Networks, Inc. Other products and company names are trad

-19- D. Dial-up Network: To surf the Internet via PSTN/ISDN. 4.4.1 Static IP Address WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS

-20- ISDN TA. 5. Extra Setting: (initialization string) optional. Used to optimize the communication quality between the ISP and your MODEM or ISDN T

-21- 4.5 DHCP Server The settings of a TCP/IP network include host IP, subnet mask, gateway, and DNS configurations. It is not easy to manually conf

-22- address pool. 3. Domain Name: Optional: this information will be passed to the client. Function of buttons: Client List... List the current map

-23- 4.6 Virtual Server This product’s NAT firewall filters out unrecognized packets to protect your Intranet, thus all hosts behind this product are

-24- Service Port Server IP Enable 21 192.168.123.1 V 80 192.168.123.2 V 1723 192.168.123.6 V

-25- 4.7 Special AP Some applications require multiple connections, such as Internet games, video conferencing, Internet telephony, etc. Because of

-26- 4.8 Access Control Access Control allows you to assign different access rights to different users. First, you have to divide users into differen

-27- Function of buttons: MAC Level... The “Access Control” is based on IP addresses only. If a user is able to change his/her IP address, then s/he w

-28- 4.9 Misc. Items 1. IP Address of DMZ Host: DMZ (Demilitarized Zone) Host is a host without the protection of firewall. It allows a computer to

-2- Table of Contents Chapter 1 Introduction...4 1.1 Functions and Featu

-29- 4. Discard PING from WAN side: When this feature is enabled, no host on the WAN can ping the Barricade. 5. Non-standard FTP port: You have to c

-30- 4.10 Wireless Setting Wireless settings allow you to set the wireless configuration items. 1. Network ID (SSID): Network ID is used for identif

-31- please select one WEP key to be used and input 26 or 10 hexidecimal (0, 1, 2…8, 9, A, B…F) digits. Function of buttons: MAC Address Control... S

-32- 4.11 MAC Address Control MAC Address Control Every client that connects to the network has a unique MAC (Media Access Control) address on his or

-33- Barricade and to the Internet. If a client is denied “connection” to this device, it means that the client can't access the Internet and som

-34- receive any data through the Wireless Barricade. Choose "Allow" or "Deny" to allow or deny clients whose MAC addresses are no

-35- table indicates the MAC address and the mapped IP address of a client. There are four columns in this table: MAC Address Indicates a specific

-36- Chapter 5 Print Server This product provides the function of the network print server for MS Windows 95/98/NT/2000 and Unix-based platforms. Y

-37- 1. Find out the corresponding icon of your server printer, for example, the HP LaserJet 6L. Click the mouse’s right button on that icon, and the

-38- 3. Choose the “PRTmate: (All-in-1)” from the list attached at the Print To item. Be sure that the Printer Driver item is configured to the corre

-3- 5.4 Configuring on Unix-based Platforms...40 Appendix A: TCP/IP Configuration for Windows 95/98 ...

-39- Compared to the procedure in the previous section, the selection of Details is equivalent to the selection of Ports, and Port Settings is equival

-40- 5.4 Configuring on Unix-based Platforms Please follow the traditional configuration procedure on Unix platforms to set up the print server of thi

-41- Appendix A: TCP/IP Configuration for Windows 95/98 This section advises on how to install TCP/IP protocol into your personal computer. It assume

-42- 5. Select the Microsoft item in the manufacturers list. Choose TCP/IP in the Network Protocols. Click OK button to return to Network window. 6

-43- 2. Double click Network icon. Select the TCP/IP line that has been associated to your network card in the Configuration tab of the Network windo

-44- a. Select Obtain an IP address automatically in the IP Address tab.

-45- b. Do not input any value in the Gateway tab.

-46- c. Choose Disable DNS in the DNS Configuration tab.

-47- B. Configure IP manually a. Select Specify an IP address in the IP Address tab. The default IP address of this product is 192.168.123.254. Ther

-48- b. In the Gateway tab, add the IP address of this product (default IP is 192.168.123.254); in the New gateway field and click Add button.

-4- Chapter 1 Introduction Congratulations on your purchase of this outstanding SMC Wireless Broadband Router. This product is designed specifically

-49- c. In the DNS Configuration tab, add the DNS values which are provided by the ISP into DNS Server Search Order field and click Add button.

-5- l DHCP server supported All of the networked computers can retrieve TCP/IP settings automatically from this product. l Web-based configuring Con

-6- Chapter 2 Hardware Installation 2.1 Panel Layout 2.1.1. Front Panel LEDs monitor the status of each port. Figure 2-1 Front Panel LED: LED Func

-7- 2.1.2. Rear Panel The rear panel features three 10/100 Mbps Ethernet ports and one Wide Area network (WAN) port. The WAN port connects your DSL or

-8- 2.2 Procedure for Hardware Installation 1. Decide Where to Place Your Wireless Broadband Router: You can place your Wireless Broadband Router on