SMC Networks SMC9462TX Manual do Utilizador Página 38
- Página / 62
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
C
ONFIGURING
AND
T
ESTING
THE
N
ETWORK
C
ARD
3-2
configuration the switch will sense the link speed but will default
to half duplex. If the link partner is configured to full duplex, the
adapter will not connect correctly resulting in high error rates and
inefficient communication. Therefore, auto-negotiation should be
disabled when connecting to a card with fixed configuration.
Network Type
This field is used to select link speed and duplex capabilities of the
adapter. When auto-negotiate is disabled, these are the settings of
the card. The default value is “Auto.”
Network Address
This field lets you set a local network MAC address to override the
permanent MAC address that is stored in EEPROM on the card. This
feature is useful if the adapter is being used in a test environment.
However, for normal use it is recommended to retain the factory-set
“Permanent” MAC address.
Jumbo Frame Size
The adapter can be configured to use Jumbo Frames. This increases
the maximum Ethernet frame size to greater than 1514 bytes. Using
Jumbo Frames greatly reduces packet processing overhead and can
boost throughput by up to 300% for bulk data transfers.
Note: To use Jumbo Frames, both communicating computers
must have network cards that support this feature. Also, at
full duplex, all switches in the network between the two
end computers must be able to accept the extended frame
size. With half-duplex connections, all devices in the
collision domain need to support Jumbo Frames.
IEEE Compliance.
This option should be set to disabled if the link partner does not
comply to the IEEE802.3 specifications for 1000BASE-T network
adapters. This is often characterized by an intermittent connection
and can occur with older gigabit ethernet hardware.
- EZ Card1000 1
- EZ Card 1000 3
- User Guide 3
- Limited Warranty 5
- OMPLIANCES 7
- Industry Canada - Class B 8
- Japan VCCI Class B 8
- NSTALLING 11
- Hardware Description 12
- Figure 1-2. Status LEDs 13
- SuperDisk Contents 14
- System Requirements 15
- Inserting the Network Card 15
- PCI Configuration 17
- Connecting Category 5 Cable 18
- Windows NT 4.0 Installation 21
- ONFIGURING 22
- Windows 2000 Installation 25
- Novell NetWare Installation 26
- # reboot 33
- Windows 98 Installation 34
- Other Installations 36
- Latest Drivers 36
- Auto-Negotiation 37
- ROUBLESHOOTING 41
- Solutions for Common Problems 43
- Network Connection Problems 44
- Cable Specifications 45
- 1000BASE-T Pin Assignments 47
- PECIFICATIONS 49
- Software Drivers 51
- Glossary-1 53
- Glossary-2 54
- Glossary-3 55
- Glossary-4 56
- , 1-7, 2-16 58
- 6 Hughes 61
- Irvine, CA 92618 61
- Phone: (949) 707-2400 61
Manuais e produtos relacionados com Placas/adaptadores de interface SMC Networks SMC9462TX
(2 páginas)
(2 páginas)Panasonic KXTGA575 manuales
Manuales del propietario y guías del usuario para Teléfonos Panasonic KXTGA575.
Ofrecemos 1 manuales en pdf Panasonic KXTGA575 para descargar gratis por tipos de documentos: Instrucciones de operaciones
Comentários a estes Manuais