SMC Networks SMCGS24C-SMART Manual do Utilizador descarregar pdf (Página 56)

ONFIGURING

THE

WITCH

5-6

Web Configuration

Displaying Status Overview

You can easily identify the system by displaying the device name, location

and contact information.

Field Attributes

System Information

• System Name – Name assigned to the switch system.

• Number of Ports – Number of built-in ports.

• Hardware Version – Hardware version of the main board.

• Code Version – Version number of the code.

• Serial Number – The serial number of the switch.

Address Information

• Management VLAN – ID of the configured VLAN (this is set to 1 and

cannot be changed) all ports on the unit are members of VLAN 1. The

management station must always be attached to a port on VLAN 1.

• IP Address – Address of the VLAN to which the management station

is attached. (Note that the management station must always be on

VLAN 1. Valid IP addresses consist of four decimal numbers, 0 to 255,

separated by periods.

• Subnet Mask – This mask identifies the host address bits used for

routing to specific subnets. (Default: 255.255.255.0)

• Gateway IP Address – IP address of the gateway router between the

switch and management stations that exist on other network segments.

(Default: 0.0.0.0)

•MAC Address – The physical layer address of the switch.

Port Information

•Type – Indicates the port type.

•Link Status – Indicates if the link is Up or Down.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 117 118

Sem comentários

SMC Networks SMCGS24C-SMART Manual do Utilizador Página 56