Smc-networks SMC1255TX Manual do Utilizador descarregar pdf (Página 18)

NSTALLATION

4. Attach the Wake-On-LAN cable (optional). If you require

Wake-On-LAN capability from a powered-off state, attach one

end of the 3-pin Wake-On-LAN cable to the connector on the

top edge of the card, and the other end to the “5 V Standby”

connector on the computer’s motherboard. Refer to your

computer’s installation manual to locate this connector.

5. Connect the Barricade PCI card directly to a 10BASE-T or

100BASE-TX hub or switch using UTP cable (Category 3,

4, or 5 for 10BASE-T; Category 5 for 100BASE-TX). The

maximum allowable length of UTP cable connections is

100 meters (328 ft). When inserting an RJ-45 plug, be sure

the tab on the plug clicks into position to ensure that it is

properly seated.

6. Replace the computer’s cover and power it on. The Barricade

PCI card should be automatically configured by the host

computer’s BIOS. However, if you have an older computer,

you may have to manually configure the computer’s BIOS

settings. See “Troubleshooting” on page 36.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 54 55

Sem comentários

Smc-networks SMC1255TX Manual do Utilizador Página 18