SMC Networks SMC6709L2 Manual do Utilizador descarregar pdf (Página 36)

ONFIGURING

THE

WITCH

3-14

• The ports at both ends of a trunk must be configured in an identical

manner, including communication mode (i.e., speed, duplex mode and

flow control), VLAN assignments, and CoS settings.

• All the ports in a trunk have to be treated as a whole when moved from/

to, added or deleted from a VLAN.

• The same STP, VLAN, and IGMP settings must be configured for all the

ports in a trunk.

Configuring Static Trunks

You can manually assign specific ports to a static trunk.

Command Usage

• To avoid creating a loop in the network, be sure that you add a static

trunk via the Web interface before connecting the ports, and also

disconnect ports before removing a static trunk via the Web interface.

• When using static trunks, you may not be able to link to switches of

different types, depending on the manufacturer’s implementation.

Field Attributes

Aggregator Setting page

• System Priority – Not applicable for static trunks.

• Group ID – Specifies the static trunk group. (Range: 1-4)

• LACP – Set this field to “Disable” when configuring a static trunk.

• Work Ports – Assigns port members to the static trunk. (Range: 1-8)

Aggregator Information page

• Group Key – Displays active static trunks.

• Port No – Shows the port members assigned to each static trunk.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 149 150

Sem comentários

SMC Networks SMC6709L2 Manual do Utilizador Página 36