SMC Networks SMC6724L2 Manual do Utilizador descarregar pdf (Página 40)

AKING

ETWORK

ONNECTIONS

4-2

make a connection, PCs can be connected to these ports with

straight-through cable.

10BASE-T/100BASE-TX hubs and switches, on the other hand, may

have either crossover (MDI-X) or straight-through (MDI) ports. For

this reason, the type of cable used to connect these devices to the

TigerSwitch is determined by the port on the other device, as

shown in the table below. (See Appendix B for further

information on cabling.)

Warning: Do not plug a phone jack connector into an

RJ-45 port. This will damage the switch. Use only

twisted-pair cables with RJ-45 connectors that conform to

FCC standards.

Crossover/Straight-Through Wiring Requirement

If the port on the

switch is...

And the port on the

other device is...

Then use...cable

Crossover (x) Crossover Crossover

Crossover (x) Straight-through Straight-through

Straight-through (=) Crossover Straight-through

Straight-through (=) Straight-through Crossover

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Sem comentários

SMC Networks SMC6724L2 Manual do Utilizador Página 40