SMC Networks SMC6824M Manual do Utilizador descarregar pdf (Página 405)

100

101

OMMAND

INE

NTERFACE

4-113

dot1x operation-mode

This command allows single or multiple hosts (clients) to connect to an

802.1X-authorized port. Use the no form with no keywords to restore the

default to single host. Use the no form with the multi-host max-count

keywords to restore the default maximum count.

Syntax

dot1x operation-mode {single-host | multi-host [max-count count]}

no dot1x operation-mode [multi-host max-count]

• single-host – Allows only a single host to connect to this port.

• multi-host – Allows multiple host to connect to this port.

• max-count – Keyword for the maximum number of hosts.

count – The maximum number of hosts that can connect to a port.

(Range: 1-20; Default: 5)

Default

Single-host

Command Mode

Interface Configuration

Command Usage

• The “max-count” parameter specified by this command is only effective

if the dot1x mode is set to “auto” by the dot1x port-control command

(page 4-105).

• In “multi-host” mode, only one host connected to a port needs to pass

authentication for all other hosts to be granted network access. Similarly,

a port can become unauthorized for all hosts if one attached host fails

re-authentication or sends an EAPOL logoff message.

Example

Console(config)#interface eth 1/2

Console(config-if)#dot1x operation-mode multi-host max-count 10

Console(config-if)#

1 2 ... 400 401 402 403 404 405 406 407 408 409 410 ... 607 608

Comentários a estes Manuais

Sem comentários

SMC Networks SMC6824M Manual do Utilizador Página 405

Comentários a estes Manuais

Manuais e produtos relacionados com Comutadores de rede SMC Networks SMC6824M