SMC Networks SMC8624/48T Manual do Utilizador descarregar pdf (Página 182)

100

101

ONFIGURING

THE

WITCH

3-134

By default all VLANs are assigned to the Internal Spanning Tree

(MST Instance 0) that connects all bridges and LANs within the MST

region. This switch supports up to 65 instances. You should try to group

VLANs which cover the same general area of your network. However,

remember that you must configure all bridges within the same MSTI

Region (page 3-124) with the same set of instances, and the same instance

(on each bridge) with the same set of VLANs. Also, note that RSTP treats

each MSTI region as a single node, connecting all regions to the Common

Spanning Tree.

To use multiple spanning trees:

1. Set the spanning tree type to MSTP (STA Configuration, page 3-121).

2. Enter the spanning tree priority for the selected MST instance

(MSTP VLAN Configuration).

3. Add the VLANs that will share this MSTI

(MSTP VLAN Configuration).

Note: All VLANs are automatically added to the IST (Instance 0).

To ensure that the MSTI maintains connectivity across the

network, you

must configure a related set of bridges with the same MSTI settings.

Command Attributes

• MST Instance – Instance identifier of this spanning tree. (Default: 0)

• Priority – The priority of a spanning tree instance. (Range: 0-61440 in

steps of 4096; Options: 0, 4096, 8192, 12288, 16384, 20480, 24576,

28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440;

Default: 32768)

• VLANs in MST Instance – VLANs assigned this instance.

• MST ID – Instance identifier to configure. (Range: 0-57; Default: 0)

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 555 556

Comentários a estes Manuais

Sem comentários

SMC Networks SMC8624/48T Manual do Utilizador Página 182

Comentários a estes Manuais

Manuais e produtos relacionados com Comutadores de rede SMC Networks SMC8624/48T