SMC Networks SMC8624/48T Manual do Utilizador Página 434

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 556
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 433
C
OMMAND
L
INE
I
NTERFACE
4-189
channel-group
This command adds a port to a trunk. Use the no form to remove a port
from a trunk.
Syntax
channel-group channel-id
no channel-group
channel-id - Trunk index (Range: 1-6)
Default Setting
The current port will be added to this trunk.
Command Mode
Interface Configuration (Ethernet)
Command Usage
When configuring static trunks, the switches must comply with the
Cisco EtherChannel standard.
•Use no channel-group to remove a port group from a trunk.
•Use no interfaces port-channel to remove a trunk from the switch.
Example
The following example creates trunk 1 and then adds port 11.
Console(config)#interface port-channel 1
Console(config-if)#exit
Console(config)#interface ethernet 1/11
Console(config-if)#
Vista de página 433
1 2 ... 429 430 431 432 433 434 435 436 437 438 439 ... 555 556

Comentários a estes Manuais

Sem comentários