SMC Networks TigerAccess SMC7816M Manual do Utilizador descarregar pdf (Página 652)

100

101

NTERFACE

OMMANDS

25-10

Command Mode

Interface Configuration (Ethernet - Port 17-18)

Command Usage

Auto-negotiation must be enabled to use the “auto” option for this

command. It must be disabled to force the pinout setting to one of the

fixed modes of “normal” (MDI) or “crossover” (MDI-X).

One side of a link must be configured with MDI pinouts and the other

side with MDI-X pinouts to ensure that signals sent from the transmit

pins on one side of the link are received on the receive pins by the link

partner. For more information on the signals used for each of these

pinout types, refer to the Installation Guide.

Example

This forces the Port 18 to MDI mode.

shutdown

This command disables an interface. To restart a disabled interface, use the

no form.

Syntax

[no] shutdown

Default Setting

All interfaces are enabled.

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

This command allows you to disable a port due to abnormal behavior

(e.g., excessive collisions), and then reenable it after the problem has

been resolved. You may also want to disable a port for security reasons.

Console(config)#interface ethernet 1/18

Console(config-if)#switchport mdix normal

Console(config-if)#

1 2 ... 647 648 649 650 651 652 653 654 655 656 657 ... 961 962

Comentários a estes Manuais

Sem comentários

SMC Networks TigerAccess SMC7816M Manual do Utilizador Página 652

Comentários a estes Manuais