SMC Networks TigerAccess SMC7816M Manual do Utilizador Página 731

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 962
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 730
L
INE
P
ROFILE
C
OMMANDS
29-49
Example
The following sets an SNR of 12 dB for the downstream channels and 18
dB for the upstream channels.
Related Commands
lre noise-mgn target (29-28)
down/up-min-noise-mgn
These commands set the minimum acceptable signal-to-noise margin on a
downstream/upstream channel. Use the no form to restore the default
settings.
Syntax
{down|up}-min-noise-mgn value
no {down|up}-min-noise-mgn
down – Downstream bands.
up – Upstream bands.
value – Signal-to-noise margin. (Range: 0-62, in units of 0.5 dB)
Default Setting
10 dB
Command Mode
VDSL Line Profile
Command Usage
This command sets the minimum noise margin the receiver can
tolerate. If the noise margin falls below this level, the receiver will ask
the sender to increase its transmit power. If it is not possible to
increase the transmit power, a loss-of-margin defect occurs, the link
will fail and the receiver will attempt to re-initialize.
Console(config-line-profile)#down-target-noise-mgn 12
Console(config-line-profile)#up-target-noise-mgn 18
Console(config-line-profile)#
Vista de página 730
1 2 ... 726 727 728 729 730 731 732 733 734 735 736 ... 961 962

Comentários a estes Manuais

Sem comentários