SMC Networks SMC2582W-B Manual do Utilizador descarregar pdf (Página 10)

2. First-Time Installation and Configuration

2.1. Selecting a Power Supply Method

The SMC2582W-B can be powered by either the supplied power adapter or the optional SMCPWR-

INJ3 EliteConnect™ Power Injector.The SMC2582W-B automatically selects the suitable power

depending on your decision.

To power the SMC2582W-B by the supplied power adapter:

1. Plug the power adapter to an AC socket.

2. Plug the connector of the power adapter to the power jack of the SMC2582W-B.

NOTE: This product is intended to be power-supplied by a Listed Power Unit,marked “Class 2”or

“LPS”and output rated “5V DC, 1 A minimum”or equivalent statement.

To power the SMC2582W-B by SMCPWR-INJ3 Power Injector:

1. Connect the power cord cable from power outlet to the SMCPWR-INJ3 power connector.

Fig.1. Connecting the power cord cable to SMCPWR-INJ3.

2. Check the “POWER”LED:if system is normal,the LED will be on (Green light);otherwise,the

“POWER”LED will be off.

3. Connect the Ethernet cable (RJ-45 Category 5) from Ethernet Hub/Switch to the “DATA IN”port

of SMCPWR-INJ3 Power Injector.

4. Connect another Ethernet cable (RJ-45 Category 5) from “POWER & DATA OUT”port of the SMCP

WR-INJ3 Power Injector to the SMC2582W-B Wireless Bridge.

To power outlet

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Sem comentários

SMC Networks SMC2582W-B Manual do Utilizador Página 10