SMC Networks SMC2582W-B Manual do Utilizador descarregar pdf (Página 11)

Fig.2. Connecting Ethernet cables to SMCPWR-INJ3.

5. Check the “ACTIVE”LED:if power is successfully fed into the SMC2582W-B,the “ACTIVE”LED will

be on (Red light);otherwise,the “ACTIVE”LED will be off.

6. If the electricity current is over the normal condition (Io°÷1.0 A),the “ACTIVE”LED will flash

(Red light).

NOTE: SMCPWR-INJ3 is specially designed for “SMC2582W-B EliteConnect™ 2.4GHz

11Mbps Wireless Bridge.The use of SMCPWR-INJ3 with other Ethernet-ready devices

that are not compliant to 802.3af may cause damage to the devices.

2.2. Mounting the SMC2582W-B on a Wall

The SMC2582W-B is wall-mountable.

1. Stick the supplied sticker for wall-mounting.

2. Use a ø7.0mm driller to drill a 25mm-deep hole at each of the cross marks.

3. Plug in a supplied plastic conical anchor in each hole.

4. Screw a supplied screw in each plastic conical anchor for a proper depth so that the

SMC2582W-B can be hung on the screws.

5. Hang the SMC2582W-B on the screws.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Sem comentários

SMC Networks SMC2582W-B Manual do Utilizador Página 11