SMC Networks SMC8014W-G Manual do Utilizador descarregar pdf (Página 52)

B.3 | I have another IP Address displayed

If you have another IP address listed, then the PC may not be configured for a DHCP

connection. Please refer to Chapter 4 | Configure your Computer for information.

Once you have confirmed your computer is configured for DHCP, follow the steps below.

1. Open a DOS window as described above.

2. Type “ipconfig /release” (without the quotes)

3. Then type “ipconfig /renew” (without the quotes)

Once you are able to get a valid IP address from the Gateway, you can now access the web-

based Administration pages.

If you still are not getting an IP address from the Gateway, please reset the hardware as

outlined in Chapter 2 and follow the steps outlined in this appendix again. Note: all configured

settings will be erased.

If you still cannot access the Gateway once you have reset it, please contact your cable

operator for assistance.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Sem comentários

SMC Networks SMC8014W-G Manual do Utilizador Página 52