SMC Networks SMC8606T Manual do Utilizador descarregar pdf (Página 107)

NTERFACE

3-11

IP Configuration

Use the IP Configuration screen to set the bootup option, configure

the Ethernet IP address for the switch, or set the number or

concurrent Telnet sessions allowed. The screen shown below is

described in the following table.

Parameter Default Description

IP State USER-

CONFIG

Specifies whether IP functionality is

enabled via manual configuration, or

set by Boot Protocol (BootP).

Options include:

BOOTP Get IP - IP is enabled but

will not function until a BootP reply

has been received. BootP requests

will be periodically broadcast by the

switch in an effort to learn its IP

address. (BootP values include the IP

address, default gateway, and subnet

mask.)

USER-CONFIG - IP functionality is

enabled based on the default or user

specified IP Configuration. (This is

the default setting.)

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 181 182

Sem comentários

SMC Networks SMC8606T Manual do Utilizador Página 107