SMC Networks L2-Lite Manual do Utilizador descarregar pdf (Página 302)

100

101

Command Line Interface

4-14

Command Mode

Privileged Exec

Command Usage

• This command resets the entire system.

• When the system is restarted, it will always run the Power-On Self-Test. It will

also retain all configuration information stored in non-volatile memory by the

copy running-config startup-config command.

Example

This example shows how to reset the switch:

prompt

This command customizes the CLI prompt. Use the no form to restore the default

prompt.

Syntax

prompt string

no prompt

string - Any alphanumeric string to use for the CLI prompt. (Maximum

length: 255 characters)

Default Setting

Console

Command Mode

Global Configuration

Example

end

This command returns to Privileged Exec mode.

Command Mode

Global Configuration, Interface Configuration, Line Configuration, VLAN

Database Configuration, and Multiple Spanning Tree Configuration

Example

This example shows how to return to the Privileged Exec mode from the Interface

Configuration mode:

Console#reload

System will be restarted, continue <y/n>? y

Console(config)#prompt RD2

RD2(config)#

Console(config-if)#end

Console#

1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 613 614

Comentários a estes Manuais

Sem comentários

SMC Networks L2-Lite Manual do Utilizador Página 302

Comentários a estes Manuais

Manuais e produtos relacionados com Software SMC Networks L2-Lite