SMC Networks L2-Lite Manual do Utilizador descarregar pdf (Página 73)

100

101

Basic Configuration

3-25

• Speed – Sets the terminal line’s baud rate for transmit (to terminal) and receive

(from terminal). Set the speed to match the baud rate of the device connected to

the serial port. (Range: 9600, 19200, 38400 baud; Default: 9600)

• Stop Bits – Sets the number of the stop bits transmitted per byte.

(Range: 1-2; Default: 1 stop bit)

• Password

– Specifies a password for the line connection. When a connection is

started on a line with password protection, the system prompts for the password.

If you enter the correct password, the system shows a prompt.

(Default: No password)

• Login

– Enables password checking at login. You can select authentication by a

single global password as configured for the Password parameter, or by

passwords set up for specific user-name accounts. (Default: Local)

Web – Click System, Line, Console. Specify the console port connection parameters

as required, then click Apply.

Figure 3-14 Console Port Settings

1. CLI only.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 613 614

Comentários a estes Manuais

Sem comentários

SMC Networks L2-Lite Manual do Utilizador Página 73

Comentários a estes Manuais

Manuais e produtos relacionados com Software SMC Networks L2-Lite