SMC Networks L2-Lite Manual do Utilizador descarregar pdf (Página 460)

100

101

Command Line Interface

4-172

• Once the remote side of a link has been established, LACP operational

settings are already in use on that side. Configuring LACP settings for the

partner only applies to its administrative state, not its operational state, and

will only take effect the next time an aggregate link is established with the

partner.

Example

lacp admin-key (Port Channel)

This command configures a port channel's LACP administration key string. Use the

no form to restore the default setting.

Syntax

lacp {actor | partner} admin-key key

[no] lacp {actor | partner} admin-key

key - The port channel admin key is used to identify a specific link

aggregation group (LAG) during local LACP setup on this switch.

(Range: 0-65535)

Default Setting

Command Mode

Interface Configuration (Port Channel)

Command Usage

• Ports are only allowed to join the same LAG if (1) the LACP system priority

matches, (2) the LACP port admin key matches, and (3) the LACP port

channel key matches (if configured).

• If the port channel admin key (lacp admin key - Port Channel) is not set when

a channel group is formed (i.e., it has the null value of 0), this key is set to the

same value as the port admin key (lacp admin key - Ethernet Interface) used

by the interfaces that joined the group. Note that when the LAG is no longer

used, the port channel admin key is reset to 0.

Example

Console(config)#interface ethernet 1/5

Console(config-if)#lacp actor admin-key 120

Console(config-if)#

Console(config)#interface port-channel 1

Console(config-if)#lacp actor admin-key 3

Console(config-if)#

1 2 ... 455 456 457 458 459 460 461 462 463 464 465 ... 613 614

Comentários a estes Manuais

Sem comentários

SMC Networks L2-Lite Manual do Utilizador Página 460

Comentários a estes Manuais

Manuais e produtos relacionados com Software SMC Networks L2-Lite