SMC Networks SMC6724L3 Manual do Utilizador descarregar pdf (Página 438)

100

101

OMMAND

INE

NTERFACE

4-152

Command Mode

Global Configuration

Command Usage

Bridge priority is used in selecting the root device, root port, and

designated port. The device with the highest priority becomes the STA

root device. However, if all devices have the same priority, the device

with the lowest MAC address will then become the root device.

Example

spanning-tree pathcost method

Use this command to configure the path cost method used for Rapid

Spanning Tree. Use the no form to restore the default.

Syntax

spanning-tree pathcost method {long | short}

no spanning-tree pathcost method

• long - Specifies 32-bit based values that range from 1-200,000,000.

• short - Specifies 16-bit based values that range from 1-65535.

Default Setting

Long method

Command Mode

Global Configuration

Command Usage

The path cost method is used to determine the best path between

devices. Therefore, lower values should be assigned to ports attached to

faster media, and higher values assigned to ports with slower media.

Note that path cost (page 4-154) takes precedence over port priority

(page 4-155).

Console(config)#spanning-tree priority 40000

Console(config)#

1 2 ... 433 434 435 436 437 438 439 440 441 442 443 ... 617 618

Comentários a estes Manuais

Sem comentários

SMC Networks SMC6724L3 Manual do Utilizador Página 438

Comentários a estes Manuais

Manuais e produtos relacionados com Software SMC Networks SMC6724L3