Smc-networks TIGERSWITCH 10/100 Manual do Utilizador Página 26
- Página / 318
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
S
WITCH
M
ANAGEMENT
1-12
Trap Receivers
You can also specify SNMP stations that are to receive traps from
the switch.
To configure a trap receiver, complete the following steps:
1. From the Privileged Exec level global configuration mode
prompt, type “snmp-server host host-address
community-string,” where “host-address” is the IP address for
the trap receiver and “community-string” is the string
associated with that host. Press <Enter>.
2. In order to configure the switch to send SNMP notifications,
you must enter at least one snmp-server enable traps
command. Type “snmp-server enable traps type,” where “type”
is either authentication or link-up-down. Press <Enter>.
Saving Configuration Settings
Configuration commands only modify the running configuration
file and are not saved when the switch is rebooted. To save all
your configuration changes in nonvolatile storage, you must copy
the running configuration file to the start-up configuration file
using the “copy” command.
To save the current configuration settings, enter the following
command:
1. From the Privileged Exec mode prompt, type “copy
running-config startup-config” and press <Enter>.
Console(config)#snmp-server enable traps link-up-down
Console(config)#
- TigerSwitch 10/100 1
- Management Guide 3
- ANAGEMENT 15
- ONNECTING 17
- Remote Connections 18
- Basic Configuration 19
- Setting Passwords 20
- Setting an IP Address 21
- Saving Configuration Settings 26
- Managing System Files 27
- System Defaults 28
- AVIGATING 35
- Panel Display 36
- Main Menu 37
- Setting the IP Address 43
- Manual Configuration 45
- Using DHCP/BOOTP 45
- Managing Firmware 52
- Resetting the System 56
- (Global Setting) 59
- Enabling or Disabling GVRP 59
- Versions 60
- ISPLAYING 61
- Port Configuration 62
- Configuring Port Mirroring 69
- Address Table Settings 70
- Setting Static Addresses 71
- Displaying the Address Table 72
- Changing the Aging Time 74
- LGORITHM 77
- Information 83
- VLAN Configuration 84
- Assigning Ports to VLANs 85
- Displaying Current VLANs 89
- Command Attributes (CLI) 90
- Creating VLANs 91
- Configuring Private VLANs 100
- ONFIGURING 101
- Command Attributes 102
- Associating Community VLANs 104
- ONFIGURATION 109
- Setting the Queue Mode 110
- Port Trunk Configuration 111
- Command Usage 112
- Configuring SNMP 114
- Multicast Configuration 118
- Configuring IGMP Parameters 119
- ULTICAST 121
- Command Attribute 124
- Showing Port Statistics 128
- TATISTICS 129
- Rate Limit Configuration 130
- UTHENTICATION 133
- Statistical Values 139
- NTERFACE 143
- Telnet Connection 144
- Entering Commands 146
- Command Completion 147
- Getting Help on Commands 147
- Understanding Command Modes 149
- Exec Commands 149
- Configuration Commands 150
- Command Groups 152
- General Commands 155
- Console#disable 157
- Console> 157
- Console#configure 157
- Console(config)# 157
- Console#!2 159
- Console#config 159
- Console#reload 159
- Flash/File Commands 161
- Command Function Mode Page 162
- Console#delete test2.cfg 165
- Console# 165
- System Management Commands 168
- Example 175
- Related Commands 175
- Authentication Commands 180
- Port Authentication Commands 186
- SNMP Commands 196
- IGMP Snooping Commands 203
- 1 224.1.2.3 Eth1/11 IGMP 209
- Line Commands 210
- Console(config)#line console 211
- Console(config-line)# 211
- IP Commands 221
- Console(config-if)# 223
- REVENTION 229
- Interface Commands 230
- Default Setting 235
- Rate Limit Commands 246
- Address Table Commands 248
- Spanning Tree Commands 253
- Console(config)#spanning-tree 255
- VLAN Commands 263
- Private VLAN Commands 274
- Console(config)#vlan database 277
- XTENSION 283
- Priority Commands 288
- Mirror Port Commands 290
- Port Trunking Commands 292
- ROUBLESHOOTING 297
- Restoring Switch Defaults 302
- ESTORING 303
- Glossary-1 305
- Glossary-2 306
- Glossary-3 307
- Glossary-4 308
- Glossary-5 309
- Glossary-6 310
- Glossary-7 311
- Glossary-8 312
- SSIGNMENTS 313
- , 3-68, 3-86 316
Manuais e produtos relacionados com Monitores Smc-networks TIGERSWITCH 10/100
(2 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.028 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais