Smc-networks TIGERSWITCH 10/100 Manual do Utilizador descarregar pdf (Página 270)

100

101

OMMAND

INE

NTERFACE

3-128

switchport native vlan

Use this command to configure the PVID (i.e., default VLAN ID)

for a port. Use the no form to restore the default.

Syntax

switchport native vlan vlan-id

no switchport native vlan

vlan-id - Default VLAN ID for a port. (Range: 1-4094, no

leading zeroes)

Default Setting

VLAN 1

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

• If an interface is not a member of VLAN 1 and you assign its

PVID to this VLAN, the interface will automatically be added to

VLAN 1 as an untagged member. For all other VLANs, an

interface must first be configured as an untagged member

before you can assign its PVID to that group.

• If acceptable frame types is set to all or switchport mode is set

to hybrid, the PVID will be inserted into all untagged frames

entering the ingress port.

Example

The following example shows how to set the PVID for port 1 to

VLAN 3:

Console(config)#interface ethernet 1/1

Console(config-if)#switchport native vlan 3

Console(config-if)#

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 317 318

Comentários a estes Manuais

Sem comentários

Smc-networks TIGERSWITCH 10/100 Manual do Utilizador Página 270

Comentários a estes Manuais

Manuais e produtos relacionados com Monitores Smc-networks TIGERSWITCH 10/100